P235TR1
TUSPIPE manufactures according to the P235TR1 standard. The P235TR1 steel pipes we offer provide superior strength and stability, ensuring reliable support for a variety of industrial pressure systems.
EN10217 P235TR1
EN10217-1 P235TR1 steel pipes are welded steel tubes that are meant for pressure purposes in the technical delivery condition specified in the Norma europea. Este Norma europea applies to welded circular tubes made of non-alloy and alloy steels with specified elevated temperatures. The name of this pipe refers to its minimum yield strength in MPa stressful during manufacture. This welded steel pipe has good weldability and is suitable for different welding processes, such as fusion welding and resistance welding. This carbon steel pipe is mostly used in boilers, heat exchangers, and other high-temperature equipment and pipelines. According to the technical requirements of different standards, it can also be used in ships, vehicles, bridges, construction and etc.
¿Por qué elegir tuspipe?
Desde 1998, Tianjin United Steel Piping Co., Ltd (TUSPIPE) se ha comprometido a suministrar tubos de línea de alta calidad.
Con más de 500.000 toneladas de capacidad de producción anual, la empresa presta servicio a diversos campos e industrias, como la explotación y transmisión de petróleo y gas, la construcción naval y de automóviles, el agua y la electricidad, la protección del medio ambiente, la ingeniería mecánica, la construcción de infraestructuras, etc.
TUSPIPE da mucha importancia a la calidad de los productos y a un riguroso control de calidad de los mismos. Para mantener la buena calidad de los productos, la empresa ha establecido un Centro de Pruebas e Inspección desde 2004. Con una serie de pruebas de última generación y equipos de inspección, el centro de pruebas e inspección es capaz de realizar las pruebas de tracción, pruebas hidráulicas, pruebas de impacto, DWTT, etc.
EN10217 P235TR1 Welding Steel Name Designated
- P235TR1 the capital letter P for pressure purposes;
- P235TR1 is the required minimum yield strength for thicknesses less than or equal to 16mm;
- TR1 is the alphanumeric code for qualities without defined aluminum content, impact characteristics, or special inspection and testing criteria.
Appearance of EN 10217-1 P235TR1 Pipes
- Costura de soldadura
EN 10217-1 pipe is used in a variety of applications, many of which involve high temperatures or corrosive liquids. As a result, the weld area must be free of any defects that could lead to failure. Cracks, lack of fusion, and lack of penetration are all potential dangers, so repairs to the weld seam are not permitted. However, in the case of SAW tubes, repairs may be possible if they are carried out by an agreed documented procedure. This ensures that the repair will not adversely affect the strength or integrity of the tube.
- Superficie del tubo
These tubes must be free from external and internal surface defects that can be detected by visual examination. It is permissible to dress surface imperfections by grinding or machining provided that the wall thickness in the dressed area is not less than the specified minimum wall thickness. All dressed areas must blend smoothly into the contour of the tube. Any surface imperfection that is demonstrated to be deeper than 5% of the wall thickness T or 3mm, whichever is smaller, must be dressed.
Mechanical Properties of EN10217 P235TR1 Materials
| Grado de acero | Yield Strength ReH for T Wall Thickness in mm (Mpa) | Tensile Strength Rm | Elongation at Breakage A % min. | ||
|---|---|---|---|---|---|
| T ≤16 | 16<T≤ .40 | (Mpa) | Longitudinal | Transversal | |
| P235TR1 | 235 | 225 | 360-500 | 25 | 23 |
Chemical Composition of EN10217 P235TR1 Materials
| Grado de acero | Chemical Composition in % in Mass. | ||||
|---|---|---|---|---|---|
| Max C % | Max Si % | Max Mn % | Max P % | Max S % | |
| P235TR1 | 0.160 | 0.350 | 1.200 | 0.025 | 0.020 |
Test Frequency of EN10217 P235TR1 Pipes
| Número de tubos por unidad de ensayo | |
|---|---|
| Diámetro exterior (mm) | Número máximo de tubos por unidad de ensayo |
| D | Calidad TR1 |
| D≤114.3 | 400 |
| 114.3＜D≤323.9 | 200 |
| 323.9＜D≤660 | 100 |
| D＞660 | 50 |
EN10217 P235TR1 Minimum Thickness Specified （1）
| NPS | Diámetro exterior (mm) | Espesor de pared (mm) | Tolerancias en el exterior Exterior (mm) | Masa por unidad de longitud (kg/m) | |
|---|---|---|---|---|---|
| Max. | Min. | ||||
| 1” | 33.7 | 2.3 | 34 | 33.4 | 1.78 |
| 1.25” | 42.4 | 2.3 | 42.7 | 42.1 | 2.27 |
| 1.5” | 48.3 | 2.3 | 48.6 | 48 | 2.61 |
| 2” | 60.3 | 2.3 | 60.6 | 60 | 3.29 |
| 2.5” | 76.1 | 2.6 | 76.4 | 75.8 | 4.71 |
| 3” | 88.9 | 2.9 | 89.2 | 88.6 | 6.15 |
| 4” | 114.3 | 3.2 | 114.6 | 114 | 8.77 |
| 5” | 139.7 | 3.6 | 140 | 139.4 | 12.1 |
| 6” | 168.1 | 4 | 168.7 | 167.9 | 16.21 |
| 8” | 219.1 | 5 | 219.5 | 218.7 | 26.4 |
| 10’ | 273.1 | 5 | 275.15 | 271.05 | 33.1 |
| 12’ | 323.9 | 5.6 | 326.33 | 321.47 | 43.97 |
EN10217 P235TR1 Minimum Thickness Specified （2）
| NPS | Exterior exterior (mm) | Espesor mínimo Espesor de pared (mm) con Tolerancia | Tolerancias del diámetro exterior (mm) | Masa por unidad de longitud (kg/m) | |
|---|---|---|---|---|---|
| Max. | Min. | ||||
| 1” | 33.7 | 2.6 | 34 | 33.4 | 1.99 |
| 1.25” | 42.4 | 2.6 | 42.7 | 42.1 | 2.55 |
| 1.5” | 48.3 | 2.6 | 48.6 | 48 | 2.93 |
| 2” | 60.3 | 2.6 | 60.6 | 60 | 3.7 |
| 2.5” | 76.1 | 2.6 | 76.4 | 75.8 | 4.71 |
| 3” | 88.9 | 2.9 | 89.2 | 88.6 | 6.15 |
| 4” | 114.3 | 3.2 | 114.6 | 114 | 8.77 |
| 5” | 139.7 | 3.6 | 140 | 139.4 | 12.1 |
| 6” | 168.1 | 4 | 168.7 | 167.9 | 16.21 |
| 8” | 219.1 | 4.5 | 219.5 | 218.7 | 23.82 |
| 10’ | 273.1 | 5 | 275.15 | 271.05 | 33.1 |
| 12’ | 323.9 | 5.6 | 326.33 | 321.47 | 43.97 |
EN10217 P235TR1 Length Tolerance
| Longitud L (mm) | Tolerance (mm) for outside diameter <406.4 mm |
|---|---|
| L < 6000 | 0/+10 |
| 6000 < L < 12000 | 0/+15 |
Marking to be Applied on EN 10217-1 p235tr1 Pipes
Tubes shall be marked at least at one end, in order to facilitate their identification during transport, storage and use. The manufacturer’s name or trade mark and the product brand shall be indelibly marked on the tube by a suitable method. If the tube’s outside diameter is over 51mm, the manufacturer may replace this information with a label or tag, which shall be securely attached to the bundle or box. This label or tag shall identify the tube diameter, wall thickness and length range. In addition, the type of tube (EW, HFW, SAWL or SAWH – Symbol in accordance with the standard) and the standard number (EN 10217-1) shall be marked on the tube. For tubes made of carbon steel, the steel name or steel number shall also be included in the marking. This information helps to ensure that tubes are used in accordance with their intended purpose and are not mixed up with other types of tubes. Automated link or paint marking processes, paint stencils or hard stamps (using low stress or pin stamps) are all suitable methods for marking tubes.
