API 5CT H40
TUSPIPE offers casing and tubing products certified to the API 5CT H40 standard. All specifications meet the basic level of mechanical performance requirements, providing customers with a stable, economical, and reliable wellbore experience.
API 5CT H40
OCTG pipe is an essential component of many oil and gas operations, and API 5CT H40 OCTG pipe is a popular choice for medium-strength applications. API 5CT H40 is a kind of API 5CT steel well casing and tubing. It is mainly used for protecting petroleum well walls. API 5CT H40 steel well casing and tubing can be either welded pipe or seamless pipe. The ends of these products are usually flat end or upset end. In order to ensure the safety and quality of oil and gas well construction, API 5CT H40 well casing and tubing must be made by qualified manufacturers with good reputation. These products must be inspected and tested according to strict quality control standards before they can be delivered to customers.
Pourquoi choisir tuspipe ?
Depuis 1998, Tianjin United Steel Piping Co., Ltd (TUSPIPE) s'engage à fournir des tubes de canalisation de haute qualité.
Avec une capacité de production annuelle de plus de 500 000 tonnes, l'entreprise dessert divers domaines et industries, tels que l'exploitation et la transmission du pétrole et du gaz, la construction navale et automobile, l'eau et l'électricité, la protection de l'environnement, l'ingénierie mécanique, la construction d'infrastructures, etc.
TUSPIPE accorde une grande importance à la qualité des produits et à leur contrôle rigoureux. Afin de maintenir une bonne qualité des produits, l'entreprise a mis en place un centre d'essai et d'inspection depuis 2004. Doté d'une série d'équipements d'essai et d'inspection de pointe, le centre d'essai et d'inspection est en mesure d'effectuer des essais de traction, des essais hydrauliques, des essais d'impact, des essais DWTT, etc.
Chemical Composition of API 5CT H40
| Grade | Type | C | Mn | Mo | Cr | Ni max. | Cu max. | P max. | S max. | Si max. | ||||
| min. | max. | min. | max. | min. | max. | min. | max. | |||||||
| H40 | - | - | - | - | - | - | - | - | - | - | - | 0.03 | 0.03 | - |
Mechanical Analysis of API 5CT H40
| API 5CT Casing Pipe Type | API 5CT Casing Pipe Tensile Strength (Résistance à la traction) MPa | API 5CT Casing Pipe Yield Strength (résistance à l'élasticité) MPa | Dureté du tuyau de cuvelage API 5CT Max. |
| - | ≥414 | 379 ~ 552 | - |
API Casing/ API 5CT H40 Casing Tubing Specifications
- Specification & Size of API 5CT H40 Tubing
| DN | O. D. | Poids | W. T. | Fin du traitement | |||||||||
| Filet d'attelage non remontant | Filet d'accouplement déréglé | Qualité de l'acier | |||||||||||
| en | mm | lb./ft. | lb./ft. | en | mm | H40 | J55 | L80 | N80 | C90 | T95 | P110 | |
| 2 3/8 | 2.38 | 60.3 | 4 | - | 0.167 | 4.24 | PU | PN | PN | PN | PN | PN | - |
| 4.6 | 4.7 | 0.19 | 4.83 | PNU | PNU | PNU | PNU | PNU | PNU | PNU | |||
| 5.8 | 5.95 | 0.254 | 6.45 | - | - | PNU | PNU | PNU | PNU | PNU | |||
| 6.6 | - | 0.295 | 7.49 | - | - | P | - | P | P | - | |||
| 7.35 | 7.45 | 0.336 | 8.53 | - | - | PU | - | PU | PU | - | |||
| 2 7/8 | 2.88 | 73 | 6.4 | 6.5 | 0.217 | 5.51 | PNU | PNU | - | - | - | - | - |
| 7.8 | 7.9 | 0.276 | 7.01 | - | - | - | - | - | - | - | |||
| 8.6 | 8.7 | 0.308 | 7.82 | - | - | PLB | PLB | PLBE | - | PLB | |||
| 9.35 | 9.45 | 0.34 | 8.64 | - | - | PLB | PLB | PLBE | - | PLB | |||
| 10.5 | - | 0.392 | 9.96 | - | - | PLB | PLB | PLB | - | PLB | |||
| 11.5 | - | 0.44 | 11.18 | - | - | - | - | PLB | - | ||||
| 3 1/2 | 3.5 | 88.9 | 7.7 | - | 0.216 | 5.49 | PN | PN | PN | PN | PN | PN | - |
| 9.2 | 9.3 | 0.254 | 6.45 | PNU | PNU | PNU | PNU | PNU | PNU | PNU | |||
| 10.2 | - | 0.289 | 7.34 | PN | PN | PN | PN | PN | PN | - | |||
| 12.7 | 12.95 | 0.375 | 9.52 | - | - | PNU | PNU | PNU | PNU | PNU | |||
| 14.3 | - | 0.43 | 10.92 | - | - | P | - | P | P | - | |||
| 15.5 | - | 0.476 | 12.09 | - | - | P | - | P | P | - | |||
| 17 | - | 0.53 | 13.46 | - | - | P | - | P | P | - | |||
| 4 | 4 | 102 | 9.5 | - | 0.226 | 5.74 | PN | PN | PN | PN | PN | PN | - |
| - | 11 | 0.262 | 6.65 | PU | PU | PU | PU | PU | PU | - | |||
| 13.2 | - | 0.33 | 8.38 | - | - | P | - | P | P | - | |||
| 16.1 | - | 0.415 | 10.54 | - | - | P | - | P | P | - | |||
| 18.9 | - | 0.5 | 12.7 | - | - | P | - | P | P | - | |||
| 22.2 | - | 0.61 | 15.49 | - | - | P | - | P | P | - | |||
| 4 1/2 | 4.5 | 114 | 12.6 | 12.75 | 0.271 | 6.88 | PNU | PNU | PNU | PNU | PNU | PNU | - |
| 15.2 | - | 0.337 | 8.56 | - | - | P | - | P | P | - | |||
| 17 | - | 0.38 | 9.65 | - | - | P | - | P | P | - | |||
| 18.9 | - | 0.43 | 10.92 | - | - | P | - | P | P | PLB | |||
| 21.5 | - | 0.5 | 12.7 | - | - | P | - | P | P | PLB | |||
| 23.7 | - | 0.56 | 14.22 | - | - | P | - | P | P | PLB | |||
| 26.1 | - | 0.63 | 16 | - | - | P | - | P | P | PLB | |||
| P--Plain；N-- Filet d'accouplement non remontant；U-- Filet d'accouplement remontant； L--Intégral | |||||||||||||
- Specification & Size of API 5CT H40 Casing
| DN | O. D. | Poids | W. T. | Formulaire d'usinage en bout | ||||||||
| Qualité de l'acier | ||||||||||||
| en | mm | lb/pi | kg/m | en | mm | H40 | J55 | L80 | N80 | C90 | P110 | |
| K55 | T95 | |||||||||||
| 4 1/2 | 4.500 | 114.3 | 9.5 | 14.14 | 0.205 | 5.21 | PS | PS | - | - | - | - |
| 10.5 | 15.63 | 0.224 | 5.69 | - | PSB | - | - | - | - | |||
| 11.6 | 17.26 | 0.250 | 6.35 | - | PSLB | PLB | PLB | PLB | PLB | |||
| 13.5 | 20.09 | 0.290 | 7.37 | - | - | PLB | PLB | PLB | PLB | |||
| 15.1 | 22.47 | 0.337 | 9.56 | - | - | - | - | - | PLB | |||
| 5 | 5.000 | 127 | 11.5 | 17.11 | 0.220 | 5.59 | - | PS | - | - | - | - |
| 13 | 19.35 | 0.253 | 6.43 | - | PSLB | - | - | - | - | |||
| 15 | 22.32 | 0.296 | 7.52 | - | PSLB | PLB | PLB | PLBE | PLB | |||
| 18 | 26.79 | 0.362 | 9.19 | - | - | PLB | PLB | PLBE | PLB | |||
| 21.4 | 31.85 | 0.437 | 11.1 | - | - | PLB | PLB | PLB | PLB | |||
| 23.2 | 34.53 | 0.478 | 12.14 | - | - | - | - | PLB | - | |||
| 24.1 | 35.86 | 0.500 | 12.7 | - | - | - | - | PLB | - | |||
| 5 1/2 | 5.500 | 139.7 | 14 | 20.83 | 0.244 | 6.2 | PS | PS | - | - | - | - |
| 15.5 | 23.07 | 0.275 | 6.98 | - | PSLB | - | - | - | - | |||
| 17 | 25.3 | 0.304 | 7.72 | - | PSLB | PLB | PLB | PLBE | PLB | |||
| 20 | 29.76 | 0.361 | 9.17 | - | - | PLB | PLB | PLBE | PLB | |||
| 23 | 34.23 | 0.415 | 10.54 | - | - | PLB | PLB | PLBE | PLB | |||
| 26.8 | 39.88 | 0.500 | 12.7 | - | - | - | - | - | - | |||
| 29.7 | 44.2 | 0.562 | 14.27 | - | - | - | - | - | - | |||
| 32.6 | 48.51 | 0.625 | 15.88 | - | - | - | - | - | - | |||
| 35.3 | 52.53 | 0.687 | 17.45 | - | - | - | - | - | - | |||
| 38 | 56.55 | 0.750 | 19.05 | - | - | - | - | - | - | |||
| 40.5 | 60.27 | 0.812 | 20.62 | - | - | - | - | - | - | |||
| 43.1 | 64.14 | 0.875 | 22.22 | - | - | - | - | - | - | |||
| 6 5/8 | 6.625 | 168.28 | 20 | 29.76 | 0.288 | 7.32 | PS | PSLB | - | - | - | - |
| 24 | 35.72 | 0.352 | 8.94 | - | PSLB | PLB | PLB | PLBE | PLB | |||
| 28 | 41.67 | 0.417 | 10.59 | - | - | PLB | PLB | PLBE | PLB | |||
| 32 | 47.62 | 0.475 | 12.06 | - | - | PLB | PLB | PLBE | PLB | |||
| 7 | 7.000 | 177.8 | 17 | 25.3 | 0.231 | 5.87 | PS | - | - | - | - | - |
| 20 | 29.76 | 0.272 | 6.91 | PS | PS | - | - | - | - | |||
| 23 | 34.23 | 0.317 | 8.05 | - | PSLB | PLB | PLB | PLBE | - | |||
| 26 | 38.69 | 0.362 | 9.19 | - | PSLB | PLB | PLB | PLBE | PLB | |||
| 29 | 43.16 | 0.408 | 10.36 | - | - | PLB | PLB | PLBE | PLB | |||
| 32 | 47.62 | 0.453 | 11.51 | - | - | PLB | PLB | PLBE | PLB | |||
| 35 | 52.09 | 0.498 | 12.65 | - | - | PLB | PLB | PLBE | PLB | |||
| 38 | 56.55 | 0.540 | 13.72 | - | - | PLB | PLB | PLBE | PLB | |||
| 42.7 | 63.54 | 0.625 | 15.88 | - | - | - | - | - | - | |||
| 46.4 | 69.05 | 0.687 | 17.45 | - | - | - | - | - | - | |||
| 50.1 | 74.56 | 0.750 | 19.05 | - | - | - | - | - | - | |||
| 53.6 | 79.77 | 0.812 | 20.62 | - | - | - | - | - | - | |||
| 57.1 | 84.97 | 0.875 | 22.22 | - | - | - | - | - | - | |||
| 7 5/8 | 7.625 | 193.68 | 24 | 35.72 | 0.300 | 7.62 | PS | - | - | - | - | - |
| 26.4 | 39.29 | 0.328 | 8.33 | - | PSLB | PLB | PLB | PLBE | PLB | |||
| 29.7 | 44.2 | 0.375 | 9.52 | - | - | PLB | PLB | PLBE | PLB | |||
| 33.7 | 50.15 | 0.430 | 10.92 | - | - | PLB | PLB | PLBE | PLB | |||
| 39 | 58.05 | 0.500 | 12.7 | - | - | PLB | PLB | PLBE | PLB | |||
| 42.8 | 63.69 | 0.562 | 14.27 | - | - | PLB | PLB | PLB | PLB | |||
| 45.3 | 67.41 | 0.595 | 15.11 | - | - | PLB | PLB | PLB | PLB | |||
| 47.1 | 70.09 | 0.625 | 15.88 | - | - | PLB | PLB | PLB | PLB | |||
| 51.2 | 76.19 | 0.687 | 17.45 | - | - | - | - | - | - | |||
| 55.3 | 80.3 | 0.750 | 19.05 | - | - | - | - | - | - | |||
| 8 5/8 | 8.625 | 219.08 | 24 | 35.72 | 0.264 | 6.71 | - | PS | - | - | - | - |
| 28 | 41.62 | 0.304 | 7.72 | PS | - | - | - | - | - | |||
| 32 | 47.62 | 0.352 | 8.94 | PS | PSLB | - | - | - | - | |||
| 36 | 53.57 | 0.400 | 10.16 | - | PSLB | PLB | PLB | PLBE | PLB | |||
| 40 | 59.53 | 0.450 | 11.43 | - | - | PLB | PLB | PLBE | PLB | |||
| 44 | 65.48 | 0.500 | 12.7 | - | - | PLB | PLB | PLBE | PLB | |||
| 49 | 72.92 | 0.557 | 14.15 | - | - | PLB | PLB | PLBE | PLB | |||
| 9 5/8 | 9.625 | 244.48 | 32.3 | 48.07 | 0.312 | 7.92 | PS | - | - | - | - | - |
| 36 | 53.57 | 0.352 | 8.94 | PS | PSLB | - | - | - | - | |||
| 40 | 59.53 | 0.395 | 10.03 | - | PSLB | PLB | PLB | PLBE | - | |||
| 43.5 | 64.73 | 0.435 | 11.05 | - | - | PLB | PLB | PLBE | PLB | |||
| 47 | 69.94 | 0.472 | 11.99 | - | - | PLB | PLB | PLBE | PLB | |||
| 53.5 | 79.62 | 0.545 | 13.84 | - | - | PLB | PLB | PLBE | PLB | |||
| 58.4 | 86.91 | 0.595 | 15.11 | - | - | PLB | PLB | PLB | PLB | |||
| 59.4 | 88.4 | 0.609 | 15.47 | - | - | - | - | - | - | |||
| 64.9 | 96.58 | 0.672 | 17.07 | - | - | - | - | - | - | |||
| 70.3 | 104.62 | 0.734 | 18.64 | - | - | - | - | - | - | |||
| 75.6 | 112.5 | 0.797 | 20.24 | - | - | - | - | - | - | |||
| 10 3/4 | 10.750 | 273.05 | 32.75 | 48.74 | 0.279 | 7.09 | PS | - | - | - | - | - |
| 40.5 | 60.27 | 0.350 | 8.89 | PS | PSB | - | - | - | - | |||
| 15.5 | 67.71 | 0.400 | 10.16 | - | PSB | - | - | - | - | |||
| 51 | 75.9 | 0.450 | 11.43 | - | PSB | PSB | PSB | PSBE | PSB | |||
| 55.5 | 82.59 | 0.495 | 12.57 | - | - | PSB | PSB | PSBE | PSB | |||
| 60.7 | 90.33 | 0.545 | 13.84 | - | - | - | - | PSBE | PSB | |||
| 65.7 | 97.77 | 0.595 | 15.11 | - | - | - | - | PSB | PSB | |||
| 73.2 | 108.93 | 0.672 | 17.07 | - | - | - | - | - | - | |||
| 79.2 | 117.86 | 0.734 | 18.64 | - | - | - | - | - | - | |||
| 85.3 | 126.94 | 0.797 | 20.24 | - | - | - | - | - | - | |||
| 11 3/4 | 11.750 | 42 | 62.5 | 0.333 | 8.46 | PS | - | - | - | - | - | |
| 47 | 69.94 | 0.375 | 20.24 | - | - | - | - | - | - | |||
| 54 | 80.36 | 0.435 | 8.46 | - | - | - | - | - | - | |||
| 60 | 89.29 | 0.489 | 9.53 | - | - | - | - | - | - | |||
| 65 | 96.73 | 0.534 | 11.05 | - | - | - | - | - | - | |||
| 71 | 105.66 | 0.582 | 14.42 | - | - | - | - | - | - | |||
| 13 3/8 | 13.375 | 339.73 | 48 | 71.43 | 0.330 | 8.38 | PS | - | - | - | - | - |
| 54.5 | 81.1 | 0.380 | 9.65 | - | PSB | - | - | - | - | |||
| 61 | 90.78 | 0.430 | 10.92 | - | PSB | - | - | - | - | |||
| 68 | 101.19 | 0.480 | 12.19 | - | PSB | PSB | PSB | PSB | PSB | |||
| 72 | 107.15 | 0.514 | 13.06 | - | - | PSB | PSB | PSB | PSB | |||
| 16 | 16.000 | 406.4 | 65 | 96.73 | 0.375 | 9.53 | PS | - | - | - | - | - |
| 75 | 111.61 | 0.438 | 11.13 | - | PSB | - | - | - | - | |||
| 84 | 125.01 | 0.495 | 12.57 | - | PSB | - | - | - | - | |||
| 109 | 162.21 | 0.656 | 16.66 | - | P | P | P | - | P | |||
| 18 5/8 | 18.625 | 473.08 | 87.5 | 130.21 | 0.435 | 11.05 | PS | PSB | - | - | - | - |
| 20 | 20.000 | 508 | 94 | 139.89 | 0.438 | 11.13 | PSL | PSLB | - | - | - | - |
| 106.5 | 158.49 | 0.500 | 12.7 | - | PSLB | - | - | - | - | |||
| 133 | 197.93 | 0.635 | 16.13 | - | PSLB | - | - | - | - | |||
| P--Plain；S--Court fil；L--Long fil；B--Fil de culotte；E--Fil extrême | ||||||||||||
