P265TR1
TUSPIPE manufactures pressure pipes strictly according to the P265TR1 standard. The P265TR1 steel pipes we offer possess excellent strength and pressure resistance, making them suitable for demanding industrial equipment and piping systems.
P265TR1
EN10217-1 P265TR1 steel pipe grade is a welded steel tube for pressure purposes in the technical delivery condition specified in the 欧州規格. これは 欧州規格 applies to welded circular tubes made of non-alloy and alloy steels with specified elevated temperature properties. The name of this pipe refers to its minimum yield strength in MPa stressful during manufacture. This welded steel pipe has good weldability and is suitable for different welding processes, such as fusion welding and resistance welding. This carbon steel pipe is mostly used in boilers, heat exchangers, and other high-temperature equipment and pipelines. According to the technical requirements of different standards, it can also be used in ships, vehicles, bridges, construction and etc. EN10217-1 P265TR1 steel pipe grade is an ideal choice for conveying fluid, such as water, gas, oil and etc. Thanks to its good mechanical property and technology performance, it can be widely used in many industries.
タスパイプを選ぶ理由
1998年以来、天津聯合鋼管有限公司(TUSPIPE)は高品質のラインパイプの供給に尽力しています。
年間生産能力は50万トンを超え、石油・ガス開発、送電、船舶・自動車建造、水・電気、環境保護、機械工学、インフラ建設など、さまざまな分野・業界にサービスを提供している。
TUSPIPEは製品の品質を重視し、厳格な品質管理を行っている。製品の品質を維持するため、2004年から試験検査センターを設立しました。最新の試験・検査設備を備え、引張試験、水力試験、衝撃試験、DWTTなどを実施することができます。
EN10217 P265TR1 Welding Steel Name Designated
- P265TR1 the capital letter P for pressure purposes;
- P265TR1 the required minimum yield strength for thicknesses less than or equal to 16mm;
- TR1 the alphanumeric code for qualities without defined aluminum content, impact characteristics, or special inspection and testing criteria.
Appearance of EN 10217-1 P265TR1 Pipes
- 溶接シーム
The quality of a welding joint is crucial in the manufacturing of EN 10217-1 pipes. Any cracks, lack of fusion, or lack of penetration in the weld area can cause the pipe to fail, potentially leading to injuries or property damage. For this reason, strict quality control measures are in place to ensure that all welds meet the highest standards. In particular, repairs to the weld seam are not permitted unless they are carried out in accordance with an agreed documented procedure. This ensures that all repaired welds meet the required strength and integrity standards, ensuring the safety of both users and property.
- チューブ表面
The surface requirements mentioned in the standard apply to all types of welded or seamless pipes. These pipes shall be free from any kind of external or internal surface imperfections that can be detected by visual examination. The surface condition should be such that any surface imperfections requiring dressing can be identified easily. Dressing, in this context, means grinding or machining the surface to make it smooth. It is permissible to dress only those surface imperfections and after dressing, the wall thickness is not less than the minimum specified wall thickness. Also, all dressed areas should blend smoothly into the contour of the pipe so that there is no indentation or bulging. Any surface imperfection which is deeper than 5% of specified wall thickness T or 3mm, whichever is smaller, shall be dressed accordingly.
Mechanical Properties of EN10217 P265TR1 Materials
| Steel Grade | Yield Strength ReH for T Wall Thickness in mm (Mpa) |
引張 Strength Rm |
Elongation at Breakage A % min. | ||
|---|---|---|---|---|---|
| T ≤16 | 16<T≤ .40 | (Mpa） | 縦型 | 横断 | |
| P265TR1 | 265 | 255 | 410-570 | 21 | 19 |
Chemical Composition of EN10217 P265TR1 Materials
| Steel Grade | Chemical Composition in % in Mass. | |||||
|---|---|---|---|---|---|---|
| Max C % | Max Si % | Max Mn % | Max P % | Max S % | Max Cr % | |
| P265TR1 | 0.200 | 0.400 | 1.400 | 0.025 | 0.020 | 0.300 |
Test Frequency of P265TR1 Pipes
| 試験ユニットあたりのチューブ数 | |
|---|---|
| 外径（mm） | 試験ユニットあたりの最大チューブ数 |
| D | 品質 TR1 |
| D≤114.3 | 400 |
| 114.3＜D≤323.9 | 200 |
| 323.9＜D≤660 | 100 |
| D＞660 | 50 |
Maximum Height of the Weld Seam for SAW EN10217 P265TR1 Tubes
| Wall Thickness T | Maximum Height of the Weld Seam (mm) | |
|---|---|---|
| Inside | Outside | |
| T≤12.5 | 3.5 | 3.5 |
| T＞12.5 | 4.8 | 4.8 |
EN10217 P265TR1 Minimum Thickness Specified （1）
| NPS | 外径 (mm） | 壁厚 (mm） | 外径公差 直径 (mm) | 単位長さ当たりの質量（kg/m） | |
|---|---|---|---|---|---|
| マックスだ。 | 分。 | ||||
| 1" | 33.7 | 2.3 | 34 | 33.4 | 1.78 |
| 1.25" | 42.4 | 2.3 | 42.7 | 42.1 | 2.27 |
| 1.5" | 48.3 | 2.3 | 48.6 | 48 | 2.61 |
| 2" | 60.3 | 2.3 | 60.6 | 60 | 3.29 |
| 2.5" | 76.1 | 2.6 | 76.4 | 75.8 | 4.71 |
| 3" | 88.9 | 2.9 | 89.2 | 88.6 | 6.15 |
| 4" | 114.3 | 3.2 | 114.6 | 114 | 8.77 |
| 5" | 139.7 | 3.6 | 140 | 139.4 | 12.1 |
| 6" | 168.1 | 4 | 168.7 | 167.9 | 16.21 |
| 8" | 219.1 | 5 | 219.5 | 218.7 | 26.4 |
| 10' | 273.1 | 5 | 275.15 | 271.05 | 33.1 |
| 12' | 323.9 | 5.6 | 326.33 | 321.47 | 43.97 |
EN10217 P265TR1 Minimum Thickness Specified （2）
| NPS | 外径 外径(mm) | 最小壁厚 最小肉厚(mm) 公差 | 外径公差(mm) | 単位長さ当たりの質量（kg/m） | |
|---|---|---|---|---|---|
| マックスだ。 | 分。 | ||||
| 1" | 33.7 | 2.6 | 34 | 33.4 | 1.99 |
| 1.25" | 42.4 | 2.6 | 42.7 | 42.1 | 2.55 |
| 1.5" | 48.3 | 2.6 | 48.6 | 48 | 2.93 |
| 2" | 60.3 | 2.6 | 60.6 | 60 | 3.7 |
| 2.5" | 76.1 | 2.6 | 76.4 | 75.8 | 4.71 |
| 3" | 88.9 | 2.9 | 89.2 | 88.6 | 6.15 |
| 4" | 114.3 | 3.2 | 114.6 | 114 | 8.77 |
| 5" | 139.7 | 3.6 | 140 | 139.4 | 12.1 |
| 6" | 168.1 | 4 | 168.7 | 167.9 | 16.21 |
| 8" | 219.1 | 4.5 | 219.5 | 218.7 | 23.82 |
| 10' | 273.1 | 5 | 275.15 | 271.05 | 33.1 |
| 12' | 323.9 | 5.6 | 326.33 | 321.47 | 43.97 |
EN10217 P265TR1 Length Tolerance
| 長さ L (mm) | Tolerance (mm) for Outside Diameter <406.4 mm |
|---|---|
| L < 6000 | 0/+10 |
| 6000 < L < 12000 | 0/+15 |
Marking to be Applied on P265TR1 Pipes
Manufacturers of steel tubes must mark their product in a way that is visible and legible, in order to conform to EN 10217-1. This standard dictates that at least one end of each tube be marked with the manufacturer’s name or trade mark, the type of tube, the standard number, and the steel name or steel number. If the outside diameter of the tube is over 51mm, then this information may be replaced by a label or tag which is securely attached to the bundle or box containing the tubes. This label or tag must also identify the tube diameter, wall thickness and length range. Automated link marking, paint stenciling, hard stamping (using low stress or pin stamps), or a combination of these methods may be used so long as the information required by EN 10217-1 is visible and legible.
