Doublure fendue

TUSPIPE’s slotted liners strictly adhere to the requirements of the API 5CT international standard and can produce straight slots and keystone slots of various sizes according to customer requirements, ensuring the safety and stability of oil and gas wells.

Doublure fendue

A slotted liner is a steel pipe with screen slots cut into the pipe wall. The slots are cut along the length of the pipe, and they typically range in width from 0.020 to 0.250 inches. Slotted liners are produced in strict accordance with the standard specification API 5CT developed by international organizations and are widely used in a variety of applications such as oil and gas production, water injection and geothermal Wells. The technical principle of the groove liner is to form a slit of a specific shape and size on the metal tube body using mechanical or laser cutting technology. Allows oil and gas to pass through, prevents sand and protects production equipment.

Pourquoi choisir tuspipe ?

Depuis 1998, Tianjin United Steel Piping Co., Ltd (TUSPIPE) s'engage à fournir des tubes de canalisation de haute qualité.

Avec une capacité de production annuelle de plus de 500 000 tonnes, l'entreprise dessert divers domaines et industries, tels que l'exploitation et la transmission du pétrole et du gaz, la construction navale et automobile, l'eau et l'électricité, la protection de l'environnement, l'ingénierie mécanique, la construction d'infrastructures, etc.

TUSPIPE accorde une grande importance à la qualité des produits et à leur contrôle rigoureux. Afin de maintenir une bonne qualité des produits, l'entreprise a mis en place un centre d'essai et d'inspection depuis 2004. Doté d'une série d'équipements d'essai et d'inspection de pointe, le centre d'essai et d'inspection est en mesure d'effectuer des essais de traction, des essais hydrauliques, des essais d'impact, des essais DWTT, etc.

Slot Size of Slotted Liner

The slot size of the slotted liner, which includes the width and length of the slot, is customized to the customer’s specifications. The minimum slot width for straight or keystone slots is 0.012 inches, and the maximum slot width is 0.25 inches.

1.5 Inch Long	2.0 to 2.5 Inch Long	2.5 Inch Long
0.012 inch wide	0.024 inch wide	0.078 inch wide
0.015 inch wide	0.025 inch wide	0.125 inch wide
0.016 inch wide	0.038 inch wide	0.250 inch wide
0.018 inch wide	0.048 inch wide	-
-	0.058 inch wide	-

Slotting Patterns of Slotted Liner

Three distinct slot layouts have been created to accommodate distinct traits (shown below). In comparison to staggered and straight slot patterns, the gang slot design significantly improves the liner’s resistance to lateral buckling and collapse stresses.

Staggered Slotted Liner

Staggered slots are evenly distributed around the circumference with an offset.

Gang Slotted Liner

Gang slots are made up of many slots that are dispersed around the perimeter.

Straight Slotted Liner

Straight slotted liner features slot columns spaced evenly around the circumference without offset.

Slot Types of Slotted Liner

TUSPIPE can laser-cut slots to customer specifications, either straight or keystone.

- Straight Slots

This slot type is cut perpendicular to the liner and has the same diameter from the inside to the outside of the wall. While straight slots are less expensive to build, they are less effective in containing sand than keystone slots.

- Keystone Slots

Keystone slots, or tapered slots, are cut at a little angle and are larger on the inside than on the outside, ensuring that any particle entering the slot can pass freely without clogging it.

While keystone slots are more expensive to manufacture than straight slots, they eliminate the danger of production losses caused by filled liner slots.

Slot density

The slot density of a pipe is defined as the number of slots per foot of pipe. It is determined by the pipe’s outer surface’s open area. The open region of a slotted liner has a significant role in diminishing its sand control capacity. In general, open land is between 2% and 4% of the total area.

After determining the open area, slot width, and liner diameter, the slot density per foot can be estimated using the following formula:

N = (12*π*D*C) / (100*W*L)

N stands for slot density or the number of slots per foot
D stands for the outside diameter of the liner in inch
C stands for open area, percentage
W stands for slot width in inch
L stand for the length of the slot in inch

For example, if the open area of a 4.5″ slotted liner is 3%, the slot width is 0.02 inches, and the slot length is 1.5′, what is the slot count per foot?

The required number of slots is shown below using the calculation above:

N = (12*π *4.5*3) / (100*0.020*1.5) = 172

Remarque : This is a straightforward calculation for a straight slot or a seamed keystone slot.

Dimensions and Sizes of Slotted Liner

- Specification & Size of Tubing Slotted Liner

DN	O.D.		Poids		W.T.		Fin du traitement
	O.D.		Filet d'attelage non remontant	Filet d'accouplement déréglé	W.T.		Qualité de l'acier
	Pouce	mm	lb./ft.	lb./ft.	Pouce	mm	H40	J55	L80	N80	C90	T95	P110
2 3/8	2.375	60.32	4.00	-	0.167	4.24	PU	PN	PN	PN	PN	PN	-
			4.60	4.70	0.190	4.83	PNU	PNU	PNU	PNU	PNU	PNU	PNU
			5.80	5.95	0.254	6.45	-	-	PNU	PNU	PNU	PNU	PNU
			6.60	-	0.295	7.49	-	-	P	-	P	P	-
			7.35	7.45	0.336	8.53	-	-	PU	-	PU	PU	-
2 7/8	2.875	73.02	6.40	6.50	0.217	5.51	PNU	PNU	-	-	-	-	-
			7.80	7.90	0.276	7.01	-	-	-	-	-	-	-
			8.60	8.70	0.308	7.82	-	-	PLB	PLB	PLBE	-	PLB
			9.35	9.45	0.340	8.64	-	-	PLB	PLB	PLBE	-	PLB
			10.50	-	0.392	9.96	-	-	PLB	PLB	PLB	-	PLB
			11.50	-	0.440	11.18	-	-	-	-	PLB	-
3 1/2	3.5	88.9	7.70	-	0.216	5.49	PN	PN	PN	PN	PN	PN	-
			9.20	9.30	0.254	6.45	PNU	PNU	PNU	PNU	PNU	PNU	PNU
			10.20	-	0.289	7.34	PN	PN	PN	PN	PN	PN	-
			12.70	12.95	0.375	9.52	-	-	PNU	PNU	PNU	PNU	PNU
			14.30	-	0.430	10.92	-	-	P	-	P	P	-
			15.50	-	0.476	12.09	-	-	P	-	P	P	-
			17.00	-	0.530	13.46	-	-	P	-	P	P	-
4	4	101.6	9.50	-	0.226	5.74	PN	PN	PN	PN	PN	PN	-
			-	11.00	0.262	6.65	PU	PU	PU	PU	PU	PU	-
			13.20	-	0.330	8.38	-	-	P	-	P	P	-
			16.10	-	0.415	10.54	-	-	P	-	P	P	-
			18.90	-	0.500	12.70	-	-	P	-	P	P	-
			22.20	-	0.610	15.49	-	-	P	-	P	P	-
4 1/2	4.5	114.3	12.60	12.75	0.271	6.88	PNU	PNU	PNU	PNU	PNU	PNU	-
			15.20	-	0.337	8.56	-	-	P	-	P	P	-
			17.00	-	0.380	9.65	-	-	P	-	P	P	-
			18.90	-	0.430	10.92	-	-	P	-	P	P	PLB
			21.50	-	0.500	12.70	-	-	P	-	P	P	PLB
			23.70	-	0.560	14.22	-	-	P	-	P	P	PLB
			26.10	-	0.630	16.00	-	-	P	-	P	P	PLB
P--Plain；N-- Filet d'accouplement non remontant；U-- Filet d'accouplement remontant； L--Intégral

- Specification & Size of Casing Slotted Liner

DN	O.D.		Poids		W.T.			Formulaire d'usinage en bout
	O.D.		Poids		W.T.			Qualité de l'acier
	Pouce	mm	lb/pi	kg/m	Pouce	mm	H40	J55	L80	N80	C90	P110
	Pouce	mm	lb/pi	kg/m	Pouce	mm	H40	K55	L80	N80	T95	P110
4 1/2	4.5	114.3	9.50	14.14	0.205	5.21	PS	PS	-	-	-	-
			10.50	15.63	0.224	5.69	-	PSB	-	-	-	-
			11.60	17.26	0.250	6.35	-	PSLB	PLB	PLB	PLB	PLB
			13.50	20.09	0.290	7.37	-	-	PLB	PLB	PLB	PLB
			15.10	22.47	0.337	9.56	-	-	-	-	-	PLB
5	5	127	11.50	17.11	0.220	5.59	-	PS	-	-	-	-
			13.00	19.35	0.253	6.43	-	PSLB	-	-	-	-
			15.00	22.32	0.296	7.52	-	PSLB	PLB	PLB	PLBE	PLB
			18.00	26.79	0.362	9.19	-	-	PLB	PLB	PLBE	PLB
			21.40	31.85	0.437	11.10	-	-	PLB	PLB	PLB	PLB
			23.20	34.53	0.478	12.14	-	-	-	-	PLB	-
			24.10	35.86	0.500	12.70	-	-	-	-	PLB	-
5 1/2	5.5	139.7	14.00	20.83	0.244	6.20	PS	PS	-	-	-	-
			15.50	23.07	0.275	6.98	-	PSLB	-	-	-	-
			17.00	25.30	0.304	7.72	-	PSLB	PLB	PLB	PLBE	PLB
			20.00	29.76	0.361	9.17	-	-	PLB	PLB	PLBE	PLB
			23.00	34.23	0.415	10.54	-	-	PLB	PLB	PLBE	PLB
			26.80	39.88	0.500	12.70	-	-	-	-	-	-
			29.70	44.20	0.562	14.27	-	-	-	-	-	-
			32.60	48.51	0.625	15.88	-	-	-	-	-	-
			35.30	52.53	0.687	17.45	-	-	-	-	-	-
			38.00	56.55	0.750	19.05	-	-	-	-	-	-
			40.50	60.27	0.812	20.62	-	-	-	-	-	-
			43.10	64.14	0.875	22.22	-	-	-	-	-	-
6 5/8	6.625	168.28	20.00	29.76	0.288	7.32	PS	PSLB	-	-	-	-
			24.00	35.72	0.352	8.94	-	PSLB	PLB	PLB	PLBE	PLB
			28.00	41.67	0.417	10.59	-	-	PLB	PLB	PLBE	PLB
			32.00	47.62	0.475	12.06	-	-	PLB	PLB	PLBE	PLB
7	7	177.8	17.00	25.30	0.231	5.87	PS	-	-	-	-	-
			20.00	29.76	0.272	6.91	PS	PS	-	-	-	-
			23.00	34.23	0.317	8.05	-	PSLB	PLB	PLB	PLBE	-
			26.00	38.69	0.362	9.19	-	PSLB	PLB	PLB	PLBE	PLB
			29.00	43.16	0.408	10.36	-	-	PLB	PLB	PLBE	PLB
			32.00	47.62	0.453	11.51	-	-	PLB	PLB	PLBE	PLB
			35.00	52.09	0.498	12.65	-	-	PLB	PLB	PLBE	PLB
			38.00	56.55	0.540	13.72	-	-	PLB	PLB	PLBE	PLB
			42.70	63.54	0.625	15.88	-	-	-	-	-	-
			46.40	69.05	0.687	17.45	-	-	-	-	-	-
			50.10	74.56	0.750	19.05	-	-	-	-	-	-
			53.60	79.77	0.812	20.62	-	-	-	-	-	-
			57.10	84.97	0.875	22.22	-	-	-	-	-	-
7 5/8	7.625	193.68	24.00	35.72	0.300	7.62	PS	-	-	-	-	-
			26.40	39.29	0.328	8.33	-	PSLB	PLB	PLB	PLBE	PLB
			29.70	44.20	0.375	9.52	-	-	PLB	PLB	PLBE	PLB
			33.70	50.15	0.430	10.92	-	-	PLB	PLB	PLBE	PLB
			39.00	58.05	0.500	12.70	-	-	PLB	PLB	PLBE	PLB
			42.80	63.69	0.562	14.27	-	-	PLB	PLB	PLB	PLB
			45.30	67.41	0.595	15.11	-	-	PLB	PLB	PLB	PLB
			47.10	70.09	0.625	15.88	-	-	PLB	PLB	PLB	PLB
			51.20	76.19	0.687	17.45	-	-	-	-	-	-
			55.30	80.30	0.750	19.05	-	-	-	-	-	-
8 5/8	8.625	219.08	24.00	35.72	0.264	6.71	-	PS	-	-	-	-
			28.00	41.62	0.304	7.72	PS	-	-	-	-	-
			32.00	47.62	0.352	8.94	PS	PSLB	-	-	-	-
			36.00	53.57	0.400	10.16	-	PSLB	PLB	PLB	PLBE	PLB
			40.00	59.53	0.450	11.43	-	-	PLB	PLB	PLBE	PLB
			44.00	65.48	0.500	12.70	-	-	PLB	PLB	PLBE	PLB
			49.00	72.92	0.557	14.15	-	-	PLB	PLB	PLBE	PLB
9 5/8	9.625	244.48	32.30	48.07	0.312	7.92	PS	-	-	-	-	-
			36.00	53.57	0.352	8.94	PS	PSLB	-	-	-	-
			40.00	59.53	0.395	10.03	-	PSLB	PLB	PLB	PLBE	-
			43.50	64.73	0.435	11.05	-	-	PLB	PLB	PLBE	PLB
			47.00	69.94	0.472	11.99	-	-	PLB	PLB	PLBE	PLB
			53.50	79.62	0.545	13.84	-	-	PLB	PLB	PLBE	PLB
			58.40	86.91	0.595	15.11	-	-	PLB	PLB	PLB	PLB
			59.40	88.40	0.609	15.47	-	-	-	-	-	-
			64.90	96.58	0.672	17.07	-	-	-	-	-	-
			70.30	104.62	0.734	18.64	-	-	-	-	-	-
			75.60	112.50	0.797	20.24	-	-	-	-	-	-
10 3/4	10.75	273.05	32.75	48.74	0.279	7.09	PS	-	-	-	-	-
			40.50	60.27	0.350	8.89	PS	PSB	-	-	-	-
			15.50	67.71	0.400	10.16	-	PSB	-	-	-	-
			51.00	75.90	0.450	11.43	-	PSB	PSB	PSB	PSBE	PSB
			55.50	82.59	0.495	12.57	-	-	PSB	PSB	PSBE	PSB
			60.70	90.33	0.545	13.84	-	-	-	-	PSBE	PSB
			65.70	97.77	0.595	15.11	-	-	-	-	PSB	PSB
			73.20	108.93	0.672	17.07	-	-	-	-	-	-
			79.20	117.86	0.734	18.64	-	-	-	-	-	-
			85.30	126.94	0.797	20.24	-	-	-	-	-	-
11 3/4	11.75		42.00	62.50	0.333	8.46	PS	-	-	-	-	-
			47.00	69.94	0.375	20.24	-	-	-	-	-	-
			54.00	80.36	0.435	8.46	-	-	-	-	-	-
			60.00	89.29	0.489	9.53	-	-	-	-	-	-
			65.00	96.73	0.534	11.05	-	-	-	-	-	-
			71.00	105.66	0.582	14.42	-	-	-	-	-	-
13 3/8	13.375	339.73	48.00	71.43	0.330	8.38	PS	-	-	-	-	-
			54.50	81.10	0.380	9.65	-	PSB	-	-	-	-
			61.00	90.78	0.430	10.92	-	PSB	-	-	-	-
			68.00	101.19	0.480	12.19	-	PSB	PSB	PSB	PSB	PSB
			72.00	107.15	0.514	13.06	-	-	PSB	PSB	PSB	PSB
16	16	406.4	65.00	96.73	0.375	9.53	PS	-	-	-	-	-
			75.00	111.61	0.438	11.13	-	PSB	-	-	-	-
			84.00	125.01	0.495	12.57	-	PSB	-	-	-	-
			109.00	162.21	0.656	16.66	-	P	P	P	-	P
18 5/8	18.625	473.08	87.50	130.21	0.435	11.05	PS	PSB	-	-	-	-
20	20	508	94.00	139.89	0.438	11.13	PSL	PSLB	-	-	-	-
			106.50	158.49	0.500	12.70	-	PSLB	-	-	-	-
			133.00	197.93	0.635	16.13	-	PSLB	-	-	-	-
P--Plain；S--Court fil；L--Long fil；B--Fil de culotte；E--Fil extrême

Features of Slotted Liner

Slotted liners are filters that block large particles such as gravel and allow oil and gas to pass through. It is widely used in the petroleum industry. First, slotted liners are used in horizontal Wells and high-viscosity reservoirs. Second, steam assisted gravity Drainage (SAGD). Slotted liners are widely used between injection and production Wells. It is also used in gravel pack completions. To ensure the long-term stable production of oil wells.

Applications of Slotted Liner

Slotted liners are well screens with perforations or slots that allow the passage of fluid while preventing the passage of sand and other particulates. They are used in a variety of applications, including well completion, well rehabilitation, and sand control. Slotted liners can be made of steel, stainless steel, aluminum, or plastic, and are available in a variety of sizes and slot configurations. In well completion, slotted liners are used to provide a path for fluid flow and to prevent the wellbore from collapsing. In well rehabilitation, slotted liners can be used to increase production by creating new wellbores or by restoring damaged wellbores. And in sand control, slotted liners are used to prevent the production of sand from wells. Slotted liners are an important tool for oil and gas production, and their applications are continuing to expand.

1. What Is the Difference between a Plug and a Liner?

A plug functions like a stopper. It is a node or section. The plug seals off a well section, isolating the lower portion. It is inserted into the tubing string of the lower formation to facilitate separate production from the upper reservoir.

A liner is essentially a perforated pipe. Slotted liner is one type of such pipe, featuring numerous narrow slits cut by plasma or laser cutting. Within the wellbore structure, it allows oil and gas to flow while also supporting the wellbore walls.

2. What Is the Purpose of a Liner?

The primary purpose of a liner is to prevent wellbore collapse. Reservoir formations, often composed of soft sandstone, frequently cause wellbore collapse and blockage. Thus, the liner’s function is to support the wellbore walls, keeping the wellbore open and unobstructed.

3. What Is the Purpose of Slot Insulation?

The ultimate goal of slot insulation in slotted liners is to enable long-term, stable oil production. It prevents complete blockage of the slots, maintains consistent flow performance, and maximizes the liner’s ability to control sand and direct flow.

Doublure fendue

Doublure fendue

Slot Size of Slotted Liner

Slotting Patterns of Slotted Liner

Staggered Slotted Liner

Gang Slotted Liner

Straight Slotted Liner

Slot Types of Slotted Liner

- Straight Slots

This slot type is cut perpendicular to the liner and has the same diameter from the inside to the outside of the wall. While straight slots are less expensive to build, they are less effective in containing sand than keystone slots.

- Keystone Slots

Slot density

Dimensions and Sizes of Slotted Liner

- Specification & Size of Tubing Slotted Liner

- Specification & Size of Casing Slotted Liner

Features of Slotted Liner

Applications of Slotted Liner

Obtenir un devis maintenant